What cone does Soldate-60 Sand fire to?

Laguna Clay rates it at cone 10. Fired above its range a body can slump or bloat; fired below it, it stays porous and glaze fit is unpredictable.

Is Soldate-60 Sand food safe?

Food safety is a property of the fired glaze and the fit between glaze and body, not of the clay alone. A well-vitrified body (low absorption) with a stable, tested glaze is the usual functional combination; test your own.

← Laguna Clay

Clay body · by Laguna Clay

Soldate-60 Sand

Product code WC843 · Fires to cone 10

Published specs

As published by Laguna Clay. Shrinkage is total (wet to fired); absorption is water absorption of the fired body — the closer to 0%, the more vitrified.

Cone	Shrinkage	Absorption
cone 10	—	—

Cone range: cone 10
Grog: None listed
Maker-suggested uses: Floor Tile, Hand Building Large, Hand Building Medium, Hand Building Small, Ovenware, Pressing, Sculpture, Tableware, Throwing Large, Throwing Medium, Throwing Small, Wall Tile, Wind Chimes

What the numbers mean at the wheel

Throwing size

No shrinkage figure published — throw a 10 cm test tile and measure it fired to get your own.

How vitrified

No absorption figure published.

Clay for a batch

Fifty 450 g mugs with 10% trim waste need about 24.8 kg (55 lb) of clay — 2 boxes of 50 lb. Same for any body; what changes is how much of each mug ends up on the shelf.

Comparable bodies

Bodies in the same firing range with the closest published shrinkage and absorption — starting points for a substitute, never a drop-in. Test.

Body	Maker	Cone	Shrink.	Absorp.
Hugo Buff101	Standard Ceramic	cone 02 – 10	12%	0.75%
Stoneware119	Standard Ceramic	cone 6 – 10	12%	2%
Porcelain130	Standard Ceramic	cone 7 – 10	12%	0.5%
Stoneware153	Standard Ceramic	cone 6 – 10	14%	0.75%
White Stoneware181	Standard Ceramic	cone 10	17%	1%
Angel White182	Standard Ceramic	cone 6 – 10	12%	1.5%

Questions

What cone does Soldate-60 Sand fire to?: Laguna Clay rates it at cone 10. Fired above its range a body can slump or bloat; fired below it, it stays porous and glaze fit is unpredictable.
Is Soldate-60 Sand food safe?: Food safety is a property of the fired glaze and the fit between glaze and body, not of the clay alone. A well-vitrified body (low absorption) with a stable, tested glaze is the usual functional combination; test your own.

Working with clay generates respirable silica dust. Wet-clean, ventilate, and wear a NIOSH-approved respirator for dry work; read the manufacturer's SDS for this body.

This information is provided for planning purposes and is derived from publicly available sources including OSHA regulations, NIOSH guidance, and manufacturer safety data sheets. It does not constitute professional safety advice. Consult your material suppliers' SDS documents and applicable local regulations for authoritative safety guidance.

Sources. Specs are the manufacturer's published values, read from the product page on 2026-08-17; nothing else on that page is reproduced. Throwing sizes and batch weights are computed by Claybench with the same formulas as our free shrinkage and clay weight calculators.

Claybench keeps this body's shrinkage on every form you plan

Add a clay body once; throwing sizes, drying times and clay-per-batch follow it through the studio.

Start free